home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
User's Choice Windows CD
/
User's Choice Windows CD (CMS Software)(1993).iso
/
win_u_z
/
winscsi.zip
/
README.TXT
next >
Wrap
Text File
|
1992-05-11
|
2KB
|
49 lines
SHOWSCSI.EXE v1.11
------------------
This Windows utility scans the SCSI bus and displays an iconic view of each
device you have connected to your Adaptec SCSI host adapter (It may work
with other SCSI host adapters that conform to the ASPI standard).
You will need to have the appropriate ASPI manager loaded in your CONFIG.SYS
for this utility to work properly (ie. ASPI4DOS.SYS for the AHA-1540/1542/
1640, ASPIEDOS.SYS for the AHA-1740/1742/1744, and ASPI2DOS.SYS for the
AHA-1520/1522/1510/AIC-6260). Useful information such as device revision,
support capabilities, whether the device is SCSI-1 or SCSI-2, etc. are also
displayed. Supports color VGA monitors and above. Minimal support for
lesser monitors.
Enhancements from v1.00:
- Shades out SCSI-2 information box for SCSI-1 devices.
- Supports locking/unlocking of many removable media devices.
- Supports software eject of many removable media devices.
- Indicates whether the device supports Wide SCSI 16 and/or Wide SCSI 32.
WIN1520.EXE v1.00
-----------------
This Windows utility shows you how to properly set the jumpers for an Adaptec
AHA-1520 or AHA-1522 SCSI Host Adapter. When a selection is changed, the
jumper configuration will be modified so that the card image on the screen
can be used as a map to configure your host adapter. Only PIO mode
configurations are shown. Supports color VGA monitors and above. Minimal
support for lesser monitors.
To remove the initial pop-up help screen, run this Windows utility
as follows:
WIN1520 nohelp
**************************************************************************
THESE UTILITIES ARE FREELY DISTRIBUTABLE BUT MAY NOT BE SHIPPED WITH
COMMERCIAL SOFTWARE. FEEDBACK CAN BE SENT VIA COMPUSERVE TO THE AUTHOR:
MIKE BERHAN [70303,1111].
**************************************************************************